You're currently on:
- Home
-
- Setting Time
My Cart
You have no items in your shopping cart.
Brands
SPECIALS
INFORMATION
|
||||
|
Winding Your New Watch In order to wind your new watch you must unscrew the crown fully. Once it is fully unscrewed that is the winding notch, turning it clockwise will wind it. While doing this you should hear it winding up, do this for a few minutes then wear your watch. After setting your watch you must Physically wear the watch 24-48hr so the watch has time to wind itself up and keep time properly. You have just received your new watch. Odds are that it currently isn't running. There are no batteries in it at all. It stores energy inside it as you wear it and move around, we recommend wearing the watch for a full few days to really get it going. Setting time on: DATEJUST'S, SUBMARINER'S, GMT'S, YACHT-MASTER'S & LADIES WATCHES • Unscrew the button in the anti-clockwise direction. • Softly pull the button out a little bit. The best way to do this is to use first and second finger and use finger knuckle as a lever in order to pull the button out with as little force as possible. You can feel a little "click"! Now you can set the date by turning it anti-clockwise. When date is set, pull the button out a little bit more and you will hear another �click�. • Now you can set the time by turning it anti-clockwise. This would turn the minute-hour hands forward until you set the right time. When time is set, push the button back in the whole way and turn the button clockwise for a few rounds. Setting time on: DAY-DATE'S • Unscrew the button in the anti-clockwise direction. • Softly pull the button out a little bit. The best way to do this is to use first and second finger and use finger knuckle as a lever in order to pull the button out with as little force as possible. You can feel a little "click"! Now you can set the date by turning it anti-clockwise. • Now if you turn it clockwise you can set the day of the week. When day is set, pull the button out a little bit more and you will hear another �click�. • Now you can set the time by turning it anti-clockwise. This would turn the minute-hour hands forward until you set the right time. When time is set, push the button back in the whole way and turn the button clockwise for a few rounds. Setting time on: COSMOGRAPH DAYTONAS • Unscrew the button in the anti-clockwise direction. • Softly pull the button out a little bit. The best way to do this is to use first and second finger and use finger knuckle as a lever in order to pull the button out with as little force as possible. You can feel a little "click"! Now you can set the time by turning it anti-clockwise. When time is set, push the button back in the whole way and turn the button clockwise for a few rounds. Setting time on: PEARLMASTERS • Unscrew the button in the anti-clockwise direction. • Softly pull the button out a little bit. The best way to do this is to use first and second finger and use finger knuckle as a lever in order to pull the button out with as little force as possible. You can feel a little "click"! Now you can set the time by turning it anti-clockwise. When time is set, pull the button out a little bit more and the date will change. Keep pulling it out to change the date more. When date is set, push the button back in the whole way and turn the button clockwise for a few rounds. Adjusting the Band - Rolex • A jewellerys screwdriver (or eye glass repair kit, about $5 at local hardware store) is required to adjust band. Unscrew pin, pull it out, uncrew next pin and pull it out. Seperate the link and screw back together. Opening the Clasp - Submariner • Flip the clasp with the rolex logo open     
|
||||
 |
||||
|